Integral T

	The Integral T advantages	Your benefits
	Small active internal volume Bypass valve between inlet and outlet as a standard feature	Rapid temperature change and effective control of exothermic reactions Pressure reducer to protect pressure sensitive applications and glass
	Pivoting control unit with clear keypad and large display	Easily accessible yet splash-water protected interfaces Easy and intuitive to operate
	Specific equipment range with heating capacities up to 9 kW and cooling capacities up to 13 kW Limited target temperature range from -30 to 150 °C	Application-specific temperature control with high heating and cooling speeds Economical temperature control while eliminating unnecessary components and functions
	Strong submersible pump, large expansion volume with overflow connection Additional pump as a standard feature with T 4600 units and larger Enhanced pump and low-pressure pump available as options	Suitable for large external circuits Full cooling capacity independent from external flow May be adapted to various applications
	Compact design, all devices fitted with castors Remote control options available with use of accessory	Saves valuable laboratory space Flexible applications Mounting and sub-assembly option

Integral T Process thermostats up to 2.7 kW

Integral T process thermostats make rapid thermostating with powerful heating and cooling capacities combined with a small active internal volume possible. This minimises thermal drift and exothermic reactions are effectively controlled. Its compact construction is space-saving and makes the Integral T mobile.

The T control unit can simply be flipped open. The following interfaces are then accessible from below: connector for standby contact input, malfunction (alarm) contact output, analogue inputs and outputs, external Pt 100 and serial RS 232/RS 485 interface.

From the T 4600 units and larger, the Integral T is equipped with an additional pump allowing for more powerful circulation in the internal circuit. An adjustable bypass valve between the supply pipe and the bath of the external circuit allows for pressure reduction (e.g. in order to protect pressure-sensitive applications).

Integral T Process thermostats up to 13 kW

The more powerful T 4600 to T 10000 W Integral process thermostats have a second pump for circulation in addition to the powerful circulating pump via an internal plate-type heat exchanger and therefore provide efficient and space-saving cooling. This enables a cooling capacity of 4.6 to 13 kW at 20 °C with the smallest internal bath volume.

Integral T Process thermostats up to 2.7 kW

Technical features		T 1200	T 1200 W	T 2200	T 2200 W
Working temperature range*	°C	-25...120	-25...120	-25...120	-25...120
Temperature stability	±K	0.2	0.2	0.2	0.2
Heater power	kW	1.85	1.85	1.85	1.85
Cooling output at 20 °C	kW	1.2	1.6	2.2	2.7
Pump pressure max.	bar	3.2	3.2	3.2	3.2
Pump flow max.	L/min	40	40	40	40
Internal volume	L	3...7	3...7	3...7	3...7
Cat. No. 208-230 V; 60 Hz	-	LWP 801	LWP 802	LWP 803	LWP 804

* Working temperature range is equal to ACC range

Integral T Process thermostats up to 13 kW

Technical features		T 4600	T 4600 W	T 7000	T 7000 W	T 10000	T 10000 W
Working temperature range*	°C	-30...120	-30...120	-30...120 **	-30...120 **	-30...120 **	-30...120 **
Temperature stability	±K	0.2	0.2	0.3	0.3	0.3	0.3
Heater power 208 V/440-480 V	kW	4.9/–	4.9/–	–/5.3	–/5.3	–/7.95	–/7.95
Cooling output at 20 °C	kW	4.6	5.5	7.0	8.5	10.0	13.0
Pump pressure max.	bar	3.2	3.2	6.0	6.0	6.0	6.0
Pump flow max.	L/min	40	40	60	60	60	60
Internal volume	L	6...18	6...18	8...20	8...20	8...20	8...20
Cat. No. 208 V; 3/PE; 60 Hz	-	LWP 305	LWP 306	–	–	–	–
Cat. No. 440-480 V; 3/PE; 60 Hz		–	–	LWP 607	LWP 608	LWP 609	LWP 610

* Working temperature range is equal to ACC range
** Available from -30 up to 150 °C upon request

Reinforced polymer tubings
Special polymer tubings for high pressures

Cat.-No.:	Description	Temp.-Range °C	max. pressure in bar
RKJ 031	Polymer tube 1/2", fiber-reinforced	-40...100	20
RKJ 032	Polymer tube 3/4", fiber-reinforced	-40...100	20
RKJ 033	Polymer tube 1", fiber-reinforced	-40...100	20
RKJ 103	Polymer tube 1/2", with textile insert	-40...120	9
RKJ 104	Polymer tube 3/4", with textile insert	-40...120	9
RKJ 105	Polymer tube 1", with textile insert	-40...120	3

Insulated metal hoses

For T 1200...T 4600

Cat.-No.:	Description	Length/cm	Thread	di (mm)	de (mm)	Temp.-Range °C
LZM 075	MTK 100	100	G 3/4	20	47	-60...150
LZM 076	MTK 200	200	G 3/4	20	47	-60...150

For T 7000...T 10000

Cat.-No.:	Description	Length/cm	Thread	di (mm)	de (mm)	Temp.-Range °C
LZM 078	MTK 101	100	G 1 1/4-G 1	25	50	-60...150
LZM 079	MTK 201	200	G 1 1/4-G 1	25	50	-60...150

di = internal diameter, de = external diameter

Manifold connectors
For joining multiple external systems (suitable for water/glycol and silicone oil)

Cat.-No.:	Description	Connection	Male thread	Temp.-Range °C
LWZ 084	Four-port manifold	G 3/4"	4 x 3/4"	-30...150
LWZ 075	Four-port manifold	G 3/4"	4 x 1/2"	-30...150
LWZ 085	Four-port manifold	G 3/4"	4 x 10 mm	-30...150
LWZ 082	Four-port manifold	G 1 1/4"	4 x 3/4"	-30...150

Options	Cat.-No.:	T 1200	T 1200 W*	T 2200	T 2200 W*	T 4600	T 4600 W*
Flow control instrument	LWZ 035
	LWZ 036	-	-	-	-	-	-
Low-pressure pump 1 bar, 30 L/min, 60-Hz version	LWZ 041-2					-	-
High-power pump 5.5 bar, 40 L/min 60-Hz version	LWZ 031-2					-	-
	LWZ 032-2	-	-	-	-

Options	Cat.-No.:	T 7000	T 7000 W*	T 10000 W*	T 10000 W*
Enlarged temperature range up to 150 °C	LWZ 029
Flow control instrument	LWZ 035	-	-	-	-
	LWZ 036
Low-pressure pump 1 bar, 30 L/min, 60-Hz version	LWZ 041-2	-	-	-	-
High-power pump 5.5 bar, 40 L/min 60-Hz version	LWZ 031-2	-	-	-	-
	LWZ 032-2	-	-	-	-

* W = water-cooled version